CCNA Lab -1.3 IPv6 addressing
Download
LAB 1-3: IPv6 Addressing
You are the network administrator at Ranet, and
have to config Ranet-HQ (via Console Terminal) for
connection t use IPv6 as below:
1. set IPv6 address on interface Se0/0/0 to be
FEC0:78:0:1::2/64
2. set IPv6 address on interface Se0/1/0 to be
2001:21::2/48
3. Set IPv6 address on interface Fa0/0 to be the
gateway for Hosts in LAN as:
3.1 Set IPv6 Local address in EUI-64 that
has prefix to be FEC0:78:0:2::/64
3.2 Set IPv6 Global address in EUI-64 that
has prefix to be 2001:22::/48
If the configuration above is done,
- Host1 will be able to connect with Ranet-BR.
- Host2 will be able to connect with ISP-Router.
Solution:
Ranet-HQ router config:
Ranet-HQ>en
Ranet-HQ#conf t
Enter configuration commands, one per line. End with CNTL/Z.
Ranet-HQ(config)#ipv6 unicast-routing
Ranet-HQ(config)#int s0/0/0
Ranet-HQ(config-if)#ipv6 add FEC0:78:0:1::2/64
Ranet-HQ(config-if)#no sh
%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to up
Ranet-HQ(config-if)#int s0/1/0
Ranet-HQ(config-if)#no sh
%LINK-5-CHANGED: Interface Serial0/1/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/1/0, changed state to up
Ranet-HQ(config-if)#ipv6 add 2001:21::2/48
Ranet-HQ(config-if)#int fa0/0
Ranet-HQ(config-if)#no sh
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
Ranet-HQ(config-if)#ipv6 add FEC0:78:0:2::/64 eui-64
Ranet-HQ(config-if)#ipv6 add 2001:22::/48 eui-64
Ranet-HQ(config-if)#
%SYS-5-CONFIG_I: Configured from console by consoleRanet-HQ#
Ranet-HQ#copy run start
Destination filename [startup-config]? 2
Building configuration...
[OK]
Ranet-HQ#
----------------- End------------------
Now, Ping from Host1 to Ranet-BR and Host2 to ISP-Router is OK.
You can download this solution here
Nice day.
Copyright by http://www.lecuong.info
